REFERENCE
--------------------------------------------------------------------------
Project name:   i044-01 "Single-Axis Interface Board Summit Designer example"
Board name: 	i044-01H6-1.2.3 "Everest & Capitan XCR Interfce Board"

CONTACT DATA
--------------------------------------------------------------------------
Company:    	_____________
Contact person: _____________
Contact phone:  _____________
Contact email:  _____________ (OPERATIONS/MANUFACTURING)  
		_____________ (ENGINEERING)


--------------------------------------------------------------------------
 I M P O R T A N T:
 THIS BOARD ASSEMBLY MUST BE LEAD FREE AND ROHS COMPLIANT
 MANUFACTURING REPORT REQUIRED
--------------------------------------------------------------------------
We have Lead testing equipement and will not accept any assembly that 
contains lead. 
Please send an email confirming that you have read and accept the 
stated in this document before manufacturing.

How to read the BOM
--------------------------------------------------------------------------
BOM Note: 
DNI: Do Not Include (do not mount)

Components that have IS GENERIC = 1 could be changed to alternatives with the same parameters.

BOARD INFO
--------------------------------------------------------------------------
See Readme_PCB


PANEL INFO
--------------------------------------------------------------------------
Panel size:  3x4 boards.
Separation:  Milled 2.4 mm width + Breakaway tabs
Panel info:  See attached drawing "Panel.pdf"


SOLDER PASTE STENCIL  (TO BE DECIDED BY PCA ASSEMBLER)
--------------------------------------------------------------------------
Laser cut stencil needed.
Thickness: 100 m


PASTE  (TO BE DECIDED BY PCA ASSEMBLER)
--------------------------------------------------------------------------
Use PBFree and ROHS compliant paste.

Intended for use with SAC305 Type 3 solder (J-STD-006),
reference 88.5% metals content.
Use "no-clean" solder paste.


REFLOW PROFILE (TO BE DECIDED BY PCA ASSEMBLER)
--------------------------------------------------------------------------
Temperature profile.


--------------------------------------------------------------------------
 I M P O R T A N T:
 MANUFACTURING REPORT REQUIRED
--------------------------------------------------------------------------
A manufacturing report must be provided after manufacturing with the folowing info:
- Oven detailed temperature profile.
- Paste used (reference and manufacturer).
- Solder paste stencil thickness.



